GVE1-300B4C-D
Advantages
1.Apply vacuum system in order to…
.decrease resistance force in mold cavity for molten flow
.simplify complicated injection settings
.extend the time between mold maintenance shutdowns
.reduce mold maintenance cost
.extend mold service life
.be impressed by improvements of bubbles (vacuum voids), short shots, unequal thickness, jetting marks, weld lines, knit lines, black streaks, strain
2. Advantages for your Injection Molding Machine:
.Reduce clamping force
.Reduce injecting pressure
.Stabilize injection pressure controlling & accuracy
.Less overload circumstances thanks to none demand of ACC system
.Reduce repair cost
.Reduce reject rate
1.Apply vacuum system in order to…
.decrease resistance force in mold cavity for molten flow
.simplify complicated injection settings
.extend the time between mold maintenance shutdowns
.reduce mold maintenance cost
.extend mold service life
.be impressed by improvements of bubbles (vacuum voids), short shots, unequal thickness, jetting marks, weld lines, knit lines, black streaks, strain
2. Advantages for your Injection Molding Machine:
.Reduce clamping force
.Reduce injecting pressure
.Stabilize injection pressure controlling & accuracy
.Less overload circumstances thanks to none demand of ACC system
.Reduce repair cost
.Reduce reject rate
●Precise injecting mould system
‧Vacuum pump performance testing standard ambient conditions: 1 meter of sea level, temperature 20℃, humidity 50%±10
| Specifications | GVE1-300B4C-D |
| Vacuum Level | Medium-High |
|---|---|
| Pumping volume 50/60Hz | 4670/5500 L/min |
| Motor 50/60Hz | 0.75+1.5 / 0.75+1.5 Kw |
| Control mode | PLC Control |
| Pneumatic vacuum control valve | VACD-25KF |
| Drive pressure of pneumatic vacuum valve | 5~8 kg/cm2 |
| Pipe diameter | 1 inch |
| Dimensions LxWxH | 500x850x1140 mm |
